The use of decorative concrete has become more common than ordinary concrete due to its advantages. They can be used inside and outside homes. Among these aesthetic concretes, we find deactivated concrete.
Deactivated concrete or washed concrete is a concrete-pouring technique carried out with the aim of obtaining a particular aesthetic rendering. It is obtained with the same materials as a conventional concrete, namely aggregates, water, and cement. In the end, we obtain a concrete with a gravel appearance.
Deactivated concrete is part of the decorative concrete family. They are particularly used for exterior coverings. Apart from deactivated concrete, we find in particular printed concrete, stamped or even trompe l’oeil. They are appreciated for their resistance.
Discover here some tips for making this type of concrete successful!
Presentation of deactivated concrete
Deactivated concrete is grainy due to the use of coarse gravel and pebbles. In fact, deactivated concrete is obtained by spraying a deactivating agent on the surface of fresh concrete during pouring. In addition, it is produced according to the types of uses for which it is intended, and its materials are customizable.
Suitable for all terrains, deactivated concrete is non-slip and withstands all loads. In addition, it is more attractive than ordinary concrete by its design. It is economical because of its lifespan and its easy maintenance, which do not require a lot of investment.
The floors Concrete disabled in France are used for the decoration of exterior surfaces. Thus, individuals use this type of concrete to embellish garden paths, around swimming pools, parking lots, and others. However, professionals use it to make courtyards, public places, and more splendid. Its implementation process is very simple but technical.
The mixture of different elements
The constituent elements of ordinary concrete are also those that are used to make deactivated concrete. However, the finishes are not the same. Thus, to obtain a good result, the choice of the main materials and a good dosage of these constituents are essential.
If you have difficulty in choosing the right pigments, maybe you can check out the article by decorative concrete. This might be the best way to get the dye you want.
The first step starts with mixing things like sand, cement, gravel, granules, and water in a concrete mixer. Then add the colored substances to the concrete mixer and continue mixing without adding water. Finally, add water until a homogeneous mixture is obtained.
Setting up
The implementation of the deactivated concrete begins with the cleaning and leveling of the surface on which the resulting concrete is to be poured. Before pouring concrete, you must first place the welded mesh. Then spread the mixture with a shovel and level with a trowel until the entire surface is covered. Then you need to spray the deactivate all over the area in order to get the cement to the surface and wait for it to dry for 12 to 48 hours. Finally, using a high pressure jet, remove the visible layer so that the granules appear correctly.
Get in touch with a professional
With our qualified professionals, you are guaranteed to obtain a final result of the highest quality and lasting. Our work is always carried out with meticulousness and respect at Skye Asphalt. We are constantly rewarded for the quality offered to our customers.
Contact us now: (469) 251-5892
Continue reading on next article “6 Tips for a Successful Concrete Garden Path“
