Asphalt sealcoating offers a layer of protection against several external elements such as damage from UV rays, oils and water. Moreover, the coating provides a slip-resistant surface and gives the area that it has been applied to, a deep black finish. Overall, it gives the area a beautiful look. Asphalt sealcoating in plano is recommended for commercial establishments every 3-5 years. Because of the hot weather asphalt tend to wear out soon, proper maintenance will keep your property neat.

How to do sealcoating?

A sealcoat helps to reduce the asphalt degradation process. Sealcoating is not a laborious process and can be done just like painting with a brush. A squeegee or a brush can also be used for this purpose. The sealcoat is often an acrylic or a bituminous product that is mixed with silica sand, water, fillers, polymer additives and other such agents. This product has a liquid texture for easy application.

Benefits of driveway sealcoating

Sealcoating the driveway has some noteworthy advantages. The sealcoat helps to enhance the surface friction of the driveway and prevents it from becoming slippery. As a result, there are lesser chances of vehicles skidding with increased safety of the vehicle and the driver.

Raveling will also be under control with minimum wear of the fine material present in the driveway surface. Hence, driveway sealcoating will help to increase its texture.

Tips for asphalt sealcoating

It is important to follow some basic tips for asphalt sealcoating to get the best results. One of the most important aspects to consider is that the temperature should not be less than 50 degrees when the sealcoating is carried out. The sealcoat must not be applied if it is likely to rain during the period planned for the sealcoating process. A sunny or warm day with less humidity would be ideal to carry out this activity.

It is also important to apply at least two coats of the sealcoat to get the best results. Once the sealcoat is applied, there should be a minimum of one day curing time. No vehicles must be allowed to go over the applied surface during this period.


You can seek the assistance of companies involved in asphalt repair services to help you with the sealcoating process. The Internet has a large list of companies that are ready to help you with this. You can just search for sealcoating near me to get a list of companies in your neighborhood. Consider shortlisting a few of them and calling them up to check on their quotes and whether they meet your requirements.

If you’re a resident of Texas, then you can get in touch with Skye Asphalt based in Plano to get your sealcoating done at a reasonable rate.

It is advisable to opt for asphalt sealcoating regularly. The best option would be to get this done once in two to three years. Moreover, sealcoating stops weather damage and keeps oxidation at bay. This helps extend or even double the life of the pavement or driveway. It will help in saving a lot of money that will otherwise have to be spent on building a new one.

Call today for your FREE QUOTE!

Sealcoating is the most important thing you can do to protect your Asphalt, The suns ultra violet rays bake the essential strength and flexibility properties out of the Asphalt, Leaving the surface dry, brittle, and full of hair line cracks that leave the surface vulnerable to water invasion, Eventually the aggregate starts to ravel from the surface and causes the pavement to become rough.

The penetration from the water enlarges the cracks and then the freeze thaw cycles take their toll and add to the breakdown.Gas and oil leaks will soften and pit the asphalt as well, giving it an unsightly and not cared for look,   Sealer is the only thing known to Stop the entire process , It will protect the Asphalt from Damaging UV Rays, Gas and Oil spills, and Water Penetration.  

Our sealer Blocks UV Rays, Weather Proofs, and Resists Gas and Oil!  At pennies per square foot its a very cost effective way to protect and beautify your Asphalt keeping your investment looking new year after year!